Table of Contents
Advertisement
(b) Restart
Select "Shutdown" from "Start".
Add a check mark to "Restart Computer" and click
Yes
.
(c) Directory Delete
If c:¥DVEdit and subsequent directories remain in
Explorer after restart, delete all the files together with
the directories. If e:¥audio, e:¥Title and subsequent
directories remain, similarly delete all the files
together with the directories. (The audio-storing drive
characters may be different and there may be two or
more audio/title storing drives depending on the
case. In such a case, delete the above for all the
drives.)
7.
Installing new DVEdit
Insert a CD-ROM into the CD-ROM drive. (The case
where the CD-ROM drive is d:¥ is described below.)
Move the cursor to the Run command in the Start menu
and click the command. The Run window will be
displayed.
Type the command, "d:¥dvedit¥disk1¥setup.exe" in the
Open field of the Run window and click the
This starts the DVEdit installer, so start installing as
instructed on the panel. The subsequent operations are
the same as installing DVEdit for the first time. Start
installing according to the instructions on the panel
shown.
After install is completed, the panel asks whether or not
to restart, so restart as shown on the panel. When the
icon DVEdit on the deskstop is double-clicked after
restart, the new version of DVEdit is ready for use.
47
Not Erasing Data from DVEdit Already in Use
In upgrading the DVEdit software version, the new
software can be written over the old software. Overwrite
permits use of the existing A/V data as it is even after
upgrading the version.
1.
Virtual Memory Expansion
Observe the manual "Setting up the Virtual Memory" to
properly expand the virtual memory.
2.
Confirming the version installed
(a) Confirming the version of the Targa driver in use
Confirm the version of the Targa driver installed in
DVEdit at present. This can be confirmed on the DVR
Information panel. Click "Start", "Program", "TARGA
DV2000" and "DVRInfo" to call this panel on the
screen. Watch the "Software" tag, referring to the
figures below. The version is shown in the Product
Version line at the top.
button.
OK
Advertisement
Table of Contents
