Table of Contents
Advertisement
8. Appear the following confirmation message.
Move the cursor, select "Yes", and press [Enter] key.
Disk check now commences.
If this check discovers trouble in the disk media, a
message prompting the user to proceed with re-allo-
cation appears. When "Yes" is selected in response
to this message, the defective blocks can no longer
be used, and new blocks are re-allocated.
9. Finish these steps, appear the following message.
10. Press [ESC] key
If other disks are connected, check them all using
the same method.
Once all the disks have been checked, press [ESC]
key 2 times.
11. Select channel B and change same as channel A.
12. Finish setting for channel B(finish Item 10), press
[ESC] key.
Appear message of finish.
Select "Yes", and press [Enter] key.
13. Appear "Please press any key to reboot" , press
any key.
Setting is finish and auto reboot.
25
When AHA-3940AUWD is the SCSI board
used
1. Power On.
2. Appear next comment when Boot Up.
Adaptec AHA-3940AU/AUW/AUWD SCSI BIOS v1.xx
(c) 199x Adaptec, Inc. ALL Rights Reserved.
<<< Press <Ctrl><A> for SCSISelect(TM)Utility! >>>
3. Quickly press [Ctrl]+[A] keys when appear this com-
ment.
4. Run SCSI Utility and appear next window.
Use arrow key, select Channel(A or B), and press
[Enter] key.
5. Appear Menu window.
Select "SCSI Disk Utilities", and press [Enter] key.
Check the connected SCSI devices.
Advertisement
Table of Contents
