Table of Contents
Advertisement
8. In "Partition" on the menu bar, click "Commit
Changes Now...".
9. At the message "Do you want to save changes?",
click
Yes
.
10. The message "Disks were updated successfully"
appears. Click
.
OK
11. The message of the unformatted area of disk 0
changes to "Unknown".
12. Click the "Unknown" area of the disk to select it.
13. In "Tools" on the menu bar, click "Format".
14. The format window opens. Click
and select "NTFS".
15. Click the format option "Quick format" to check it with
the
mark.
16. Click
Start
.
The warning display appears, but
click
OK
.
17. When the message "Format complete" appears, click
OK
. Click
Close
in the format window. The for-
mat window will close.
18. In "Tools" on the menu bar, click "Assign Drive let-
ter...". The drive name can be changed to any char-
acter.
Select "Assign drive letter" (selection indicated
by
). Click
to bring up the list of characters that
can be assigned. Select one of these. The recom-
mended character is "G". After selecting the charac-
ter, click
.
OK
19. The message "Do you wish to continue?" appears.
Click
Yes
. The drive character will change.
Note: Drive characters cannot be duplicated.
31
Note: After application software is installed, the con-
Note: After application software is installed, the con-
Note: To determine whether the hard disk is for
of "File system",
tents of the video hard disks cannot be viewed
using Explorer or File Manager. However, this is
not a malfunction. Do not format the disks.
tents of the audio hard disk can be viewed
using Explorer or File Manager. However, do
not delete the data or upload any other program
or file.
Doing so will cause the disk to stop
operating.
video or audio use, judge according to the order
or capacity displayed in the Disk Administrator
mentioned above.
Advertisement
Table of Contents
