Table of Contents
Advertisement
Installing the disk in a 3.5-inch bay
Use the screws (inch screws) provided to install the
drive.
Installing the disk in a 5-inch bay
Use the brackets and screws (inch screws) provided to
install the drive. (Refer to the diagram below.)
Inch screws
When bracket attached
21
Mounting and connecting the hard disk
drive
1. Take off the front panel of the personal computer.
The assembly diagram shown below is intended as
an example. The actual connection locations may
differ depending on the model of computer used.
Hard disk bracket
Press the metal release fittings
(both sides at the same time).
2. Remove the brackets of the expansion bay.
The assembly diagram shown below is intended as
an example. The actual connection locations may
differ depending on the model of computer used.
Front Panel
Remove the brackets above and below.
After removing
Advertisement
Table of Contents
