Panasonic AY-RP500 Installation Manual page 30

When two SCSI hard disks are for video
and one SCSI hard disk is for audio
1. Disk 0 is the IDE drive, and disks 1 through 3 are the
SCSI hard disks. Two of the SCSI hard disks are for
video and one is for audio. They are in the order as
described in item 4 on page 27.
2. Set up the disk for audio use. Do this according to
the following procedure, as long as the disk is not
indicated in crosshatch display.
1) Click this area to select it. Once selected, the
rectangular frame is displayed in bold lines.
2) On the menu bar (above the window) click
"Delete" in "Partition".
3) At the message "Confirm", select
4) The area will be indicated in crosshatch display.
3. Click the crosshatched area of the disk to select it.
4. On the menu bar (above the window) click "Create"
in "Partition".
5. The screen message will prompt you for the size of
the partition to be created. Do not modify anything,
but just click .
OK
mesageis displayed, click
will have the message "Unformatted".
6. In "Partition" on the menu bar, click "Commit
Changes Now...".
7. At the message "Do you want to save changes?",
click Yes .
8. The message "Disks were updated successfully".
Click .
OK
9. The message of the unformatted area of the disk
changes to "Unknown".
10. Click the "Unknown" area of the disk to select it.
28
Yes .
When the confirmation
. The selected area
Yes
11. In "Tools" on the menu bar, click "Format".
12. The format window opens. Click
and select "NTFS".
13. Do not set the format option. No guarantee is made
for the operation if "Quick format" is selected for for-
matting. The regular formatting facility must be
used.
14. Click Start . The warning display appears, but
click .
OK
15. When the message "Format complete" appears, click
OK . Then, click Close
The format window will close.
16. In "Tools" on the menu bar, click "Assign Drive
Letter...". Select "Assign drive letter" (selection indi-
cated by ). Click to bring up the list of charac-
ters that can be assigned. Select one of these. The
recommended character is "G". After selecting the
character, click .
OK
17. The message "Do you wish to continue?" appears.
Click . The drive character will change.
Yes
18. Set up the hard disks for video. The remaining two
hard disks will be the video hard disks.
The video hard disks are used with "Unknown," and
formatting is conducted once in order to check the
hard disks. Formatting must be performed in accor-
dance with the procedure given.
19. If the disks are not indicated in crosshatch display,
carry out the procedure described in item 2 above.
20. Click the crosshatched area of the disks to select
them.
21. On the menu bar (above the window) click "Create"
in "Partition".
22. The screen message will prompt you for the size of
the partition to be created. Do not modify anything,
but just click OK .
of "File system",
in the format window.