Toshiba e-studio 3511 Network Administrator's Manual page 89

Deleting a LPR queue
Network Administrator's Guide — Setting up Printer Settings
Raw jobs - Default Paper Size — Select the default paper size that applies to a
raw job.
Raw jobs - Default Paper Type — Select the default paper type that applies to a
raw job.
Raw jobs - Default Orientation — Select the default orientation that applies to a
raw job.
Raw jobs - Default Stapling — Select whether a raw job will be stapled.
Raw jobs - Default Output Tray — Select the default output tray that applies to
a raw job. A banner page that is created by NetWare, UNIX, and Windows oper-
ating systems also will be outputted to the tray set here.
PCL Form Line — Enter the number of lines printed per page.
PCL Font Pitch — Enter the font pitch when the selected font number repre-
sents a fixed pitch scalable font. Pitch is measured by characters per inch, so a
10-pitch is ten characters per inch.
PCL Font Point Size — Enter the font size when the selected font number repre-
sents a proportionally spaced scalable font. The Font Size option allows you to
determine the point size (height) of the default font.
PCL Font Number — Enter the font number of the internal PCL font to be used
as the default font for printing. You can check the font numbers and internal PCL
fonts in the Internal PCL Font List. Please see the Printing Guide for the font
number of internal PCL fonts,
PCL Line Termination — Select the type of the line termination.
Paper Source — Select the paper source that applies to a raw job.
Symbol set — Select the symbol set that applies to a raw job.
3.
Click [Save].
• The queue name is added in the list.
1.
Select a radio button of a queue that you want to delete and
click [Delete].
• The confirmation dialog box appears.
2.
Click [OK].
• The selected queue is deleted.
89