Toshiba e-studio 3511 Network Administrator's Manual page 175

Before configuring the NetWare file server in NDPS mode, please confirm followings:
•
•
•
•
Setting up the NDPS with NetWare Administrator
•
SUPPLEMENT:
10.
Network Administrator's Guide — Setting up NetWare Print Server
For NetWare 5.x, the Support Pack 5 and Novell Gateway version 2.1.6 or later with
ndps3sp2c are installed.
For NetWare 6.x, the Support Pack 2 and Novell Gateway version 3.00 or later with
ndps3sp2c are installed.
Make sure you have a valid IP address for this equipment and for any computers that will
print to it.
In e-STUDIO4511 Series, e-STUDIO450 Series, or e-STUDIO280 Series Setup, enable
TCP/IP and enter the IP address, Subnet mask, and Gateway address for this equipment.
1.
In NetWare Administrator, select the container object to cre-
ate the printer and click the [Object] menu and select [Cre-
ate].
• The New Object dialog box appears.
2.
Select "NDPS Broker" and click [OK].
• The Create NDPS Broker Object dialog box appears.
If the NetWare file server has been installed as supporting the NDPS service, the
NDPS Broker is created as default. In this case, you can use the default NDPS Bro-
ker.
3.
Specify the "NDPS Broker Name" and "RMS Volume"
options, and click [Create].
• The NDPS Broker is created.
4.
Click the [Object] menu and select [Create].
• The New Object dialog box appears.
5.
Select "NDPS Manager" and click [OK].
• The Create NDPS Manager Object dialog box appears.
6.
Specify the "NDPS Manager Name", "Resident Server", and
"Database Volume" option, and click [Create].
• The NDPS Manager is created.
7.
Double-click the NDPS Broker object that you created.
• The NDPS Broker dialog box appears.
8.
Click [Resource Management (RMS)].
9.
Click [Add Resources...].
• The Manage Resources dialog box appears.
Select the applicable OS icon in the "Resource Types" list,
and click [Add...].
• The Add Resources dialog box appears.
175