Setting up Copier Settings
In the Copier submenu page in the Setup menu, an administrator can configure the copier set-
tings that initially apply to copy operations.
•
NOTE:
Setting the copier settings
•
SUPPLEMENT:
Network Administrator's Guide — Setting up Copier Settings
Some settings may not apply to the Touch Panel Display as soon as you save the
settings. When you change the settings, press the [RESET] button on the Control
Panel before an operation.
1.
Access TopAccess in the administrator mode.
P.15 "Accessing TopAccess Administrator Mode"
2.
Click the Setup menu and Copier submenu.
•
The Copier submenu page is displayed.
3.
In the Copier submenu page, set the copier settings as
required.
•
To set the Copier Settings, see the following:
P.66 "Setting up the Copier Settings"
4.
Click [Save].
•
The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel].
Clicking [Cancel] cannot restore the defaults. This can only clear the changes and
restore the current settings before saving the changes.
65