Toshiba e-studio 3511 Network Administrator's Manual page 71

10) Resolution
11) Original Mode
Network Administrator's Guide — Setting up Fax Settings
1) Terminal ID
Enter the terminal ID name (company name) to identify this equipment. The name will be
printed at the leading edge of all documents transmitted.
2) Fax Number
Enter the fax number of this equipment. This fax number will be printed at the leading edge
of all documents transmitted from Line 1.
3) Line 2 Number
Enter the fax number for Line 2 of this equipment — if installed. This fax number will be
printed at the leading edge of all documents transmitted from Line 2.
4) Monitor Volume
Select the volume of the line monitor during transmission.
5) Completion Volume
Select the volume of the line monitor when completing the transmission.
6) Reception Mode
Select how this equipment activates when a fax is received.
•
Auto — Select this to automatically receive incoming originals when the bell rings.
Select this when the line is being used exclusively by the fax transmission.
•
Manual — Select this to manually receive incoming originals after pressing the Start
button on the Control Panel.
7) Dial Type
Select the dial type for the Line 1.
DP — Select this to use the Dial Pulse type for the Line 1.
MF — Select this to user the Multi-frequency type for the Line 1.
8) Dial Type (Line 2)
Select the dial type for the Line 2, if installed.
DP — Select this to use the Dial Pulse type for the Line 2.
MF — Select this to use Multi-frequency type for the Line 2.
9) Line-2 Mode
Select how the Line 2 is used, if installed.
•
Tx/Rx — Select this to use Line 2 for sending and receiving a fax.
•
Rx Only (24 Hour) — Select this to use Line 2 only for receiving a fax.
•
Rx Only (Timer) — Select this to use Line 2 only for receiving a fax during specified
time. When this is selected, enter the start time and end time that Line 2 is used for only
receiving a fax.
Select the default resolution for sending faxes.
•
Standard — Select this to set the Standard mode as the default resolution appropriate
for the originals in which the text is regular size.
•
Fine — Select this to set the Fine mode as the default resolution appropriate for the orig-
inals in which the text is small or a detailed drawing is contained.
•
Ultra Fine — Select this to set the Ultra-Fine mode as the default resolution appropriate
for the originals in which the text is particularly small or a precision drawing is con-
tained.
Select the default image quality mode for sending faxes.
•
Text — Select this to set the Text mode as the default image quality mode appropriate
for sending text originals.
•
Text/Photo — Select this to set the Text/Photo mode as the default image quality mode
appropriate for sending originals containing both text and photos.
•
Photo — Select this to set the Photo mode as the default image quality mode appropriate
for sending photo originals.
71