•
NOTE:
•
SUPPLEMENT:
Removing the Client Software
You can remove client software in TopAccess so that it can no longer be installed from TopAc-
cess.
•
NOTE:
Removing the software from TopAccess
Network Administrator's Guide — Maintaining from TopAccess
At the left of each field, the file name will be displayed. Be sure to specify the same
file for each field.
The files for uploading are provided for each client software.
Driver Files — Provided in the "WebInstall" folder of the Client1 CD-ROM and
Client2 CD-ROM.
Macintosh PPD Files — Provided in the "MacPPD" folder of the Client1 CD-ROM.
UNIX Filters — Provided in the Admin's Client CD-ROM.
Point And Print — Provided in the "PandP" folder of the Client1 CD-ROM.
7.
Click [Upload].
•
Specified files are uploaded in this equipment.
The printer drivers for Point and Print that had been uploaded cannot be deleted.
However, you can upload new printer drivers to overwrite them.
1.
Access TopAccess in the administrator mode.
P.15 "Accessing TopAccess Administrator Mode"
2.
Click the Maintenance menu and Remove Software submenu.
•
The Remove Software submenu page is displayed.
3.
Check the box of the software which you are going to remove
and click [Delete].
•
The selected software is deleted from this equipment.
101