Cannot Print To This Equipment - Toshiba e-studio 3511 Network Administrator's Manual

Cannot Print To This Equipment

Problem Description
You are unable to print to this equipment. Before troubleshooting the network problems, please
see the following section to narrow the problem down to a network-related issue.
For example, network printing services have not been set up correctly, or this equipment has not
been properly configured to operate in your network environment.
The following checklist will help you identify the source of the error and direct you to informa-
tion resolving the issue. If the problem persists after you have followed all of the steps, contact
TOSHIBA's authorized dealer for further assistance.
Network Administrator's Guide — Troubleshooting Network Errors
No Check...
5 Make sure that the device
name for this equipment is
unique and verify that the
WINS and/or DNS server
database are not causing
potential naming conflicts
with the network settings on
this equipment. If necessary,
change the network settings
on this equipment. After the
communication comes back
online, can you see this
equipment in the network?
6 If the network environment is
using complex subnet or
supernet structures, is the IP
address used by this equip-
ment within the network
structures range of valid
addresses?
P.195 "Cannot Print From Client"
No Check...
1 Have you set the protocol set-
tings so they are compatible
with your network and client
protocol settings?
2 Have you set up the appropri-
ate type(s) of print services
should be supported?
3 If you are using Novell print
services, did you set up the
Novell side of network print-
ing, such as creating print
servers and attaching the
print queue?
Yes No For Instruction, Go To...
Setup the NetBIOS name of the
device correctly.
Session"
Next Step
End
Please contact your local network
support specialist for further
assistance.
End
Yes No For Instruction, Go To...
Setup the proper protocol.
Next Step
tings"
Check the settings required for
your printing environment.
Next Step
Features"
Setup the NetWare server.
Next Step
Print Server"
P.57 "Setting up the SMB
P.52 "Setting up Network Set-
P.21 "Setup Flow for Printing
P.171 "Setting up NetWare
205