Setting Up Ndps Using Toshiba Ndps Gateway; Installing The Toshiba Ndps Gateway - Toshiba e-studio 3511 Network Administrator's Manual

Setting up NDPS Using TOSHIBA NDPS Gateway

The TOSHIBA NDPS Gateway mechanism employs several components, notably the NDPS
Manager, NDPS Broker, and NDPS Printer Agent. The following figure illustrates the communi-
cation flow between these objects.
Step 1: The NetWare printer can be discovered in two ways:
Step 2: When an end-user attempts to add a NDPS printer, the client queries
Step 3: The NDPS Broker responds with a list of NDPS Printer Agents. The
Step 4: When the client workstation is ready to print, it sends the print job to
Step 5: The NDPS Manager then passes the print jobs to the TOSHIBA NDPS
Step 6: The TOSHIBA NDPS Gateway issues the printing commands to the

— Installing the TOSHIBA NDPS Gateway

•
Network Administrator's Guide — Setting up NetWare Print Server
For e-STUIO280 Series:
TOSHIBA NDPS Gateway is not available for e-STUDIO280 Series.
• The printer is automatically discovered by the TOSHIBA NDPS Gate-
way.
• You add it manually to the NDPS Manager, which resides on the
same NetWare file server as the TOSHIBA NDPS Gateway.
the NDPS Brokers to identify all available NDPS printers.
user selects a Printer Agent and the TOSHIBA NDPS Gateway down-
loads the appropriate driver to the user's desktop.
the Printer Agent, which is a virtual printer image created in the NDPS
network.
Gateway.
printer.
Considerations and Limitations
The TOSHIBA NDPS Gateway can be installed in servers running NetWare 5.x with service
pack 3A (3.0.1) or higher or NetWare 6.x. A self-extracting executable file contains both the
TOSHIBA NDPS Gateway and a NetWare Admin Snap-in component that are necessary to
support NDPS printing on the equipment.
NetWare File Server
1
6
Administrator
NDPS Broker
Printer Agent
5
NDPS Manager
1
End User
3
4
2
179