Toshiba e-studio 3511 Network Administrator's Manual page 190

Multifunctional digital systems
Hide thumbs Also See for e-studio 3511:
Table of Contents

Advertisement

IPP Printing in a Windows Operating System Environment:
Novell Printing in a NetWare Environment:
190
No Check...
2
Is the LPR/LPD Printing cor-
rectly set?
3
Were the proper printer driv-
ers installed?
4
Is the LPR port configured
with correct IP address?
5
Can you print to this equip-
ment?
No Check...
1
Are the IP Address properties
correctly set?
2
Is the HTTP Server on this
equipment enabled?
3
Is the IPP Printing correctly
set?
4
Were the proper printer driv-
ers installed?
5
Is the IPP port configured
with correct URL?
6
Can you print to this equip-
ment?
No Check...
1
Are the IPX/SPX protocol
enabled? Is the correct frame
type selected?
Yes
Next Step
Next Step
Next Step
End
Yes
Next Step
Next Step
Next Step
Next Step
Next Step
End
Yes
Next Step
Network Administrator's Guide — Troubleshooting Overview
No
For Instruction, Go To...
Setup the LPD print service cor-
rectly.
P.91 "Setting up the LPD
Print"
See the Printing Guide to install
proper printer drivers.
See the Printing Guide to config-
ure the proper port.
Refer to following section to
troubleshoot the condition.
P.205 "Cannot Print To This
Equipment"
No
For Instruction, Go To...
Setup the IP address correctly.
P.53 "Setting up the TCP/IP"
Enable the HTTP server in the
HTTP Network Service.
P.58 "Setting up the HTTP
Network Service"
Setup the IPP print service cor-
rectly.
P.92 "Setting up the IPP
Print"
See the Printing Guide to install
proper printer drivers.
See the Printing Guide to config-
ure proper port.
Refer to following section to
troubleshoot the condition.
P.205 "Cannot Print To This
Equipment"
No
For Instruction, Go To...
Setup the IPX/SPX correctly.
P.54 "Setting up the IPX/
SPX"

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents