Toshiba e-studio 3511 Network Administrator's Manual page 177

21.
22.
23.
24.
25.
26.
Configuring the LPR connection in the TCP/IP network
Network Administrator's Guide — Setting up NetWare Print Server
Specify the "NDPS Printer Name" option, select "Create a
New Printer Agent", and click [Create].
• The Create Printer Agent dialog box appears.
Specify the "Printer Agent (PA) Name" and "NDPS Manager
Name" option. Then select "Novell Printer Gateway" in the
"Gateway Types" list and click [OK].
• The Warning dialog box appears.
Click [OK] to load the NDPS Manager to the server.
• When it finishes initializing, the Information dialog box appears.
Click [OK].
• The Configure Novell PDS for Printer Agent dialog box appears.
Select "((NONE))" in the "Printer Type" list and select "Novell
Port Handler" in the "Port Handler Type" list. Then click [OK].
• The Configure Port Handler for Printer Agent dialog box appears.
Continue the procedure according to which connection type
to be used.
P.177 "Configuring the LPR connection in the TCP/IP network"
P.178 "Configuring the queue based connection in the IPX/SPX network"
1.
In the Configure Port Handler for Printer Agent dialog box,
select "Remote (LPR on IP)" and click [Next].
2.
Enter the IP address of this equipment in the "Host Address"
field, and enter "PORT_PASSTHROUGH" in the "Printer
Name" field. Then click [Finish].
• It takes about 60 seconds to load the Printer Agent. After it finishes
loading the Printer Agent, the Select Printer Drivers dialog box
appears.
3.
Select the printer drivers to be installed in the "Printer Driv-
ers" list at each OS tab, and click [Continue].
• The Information dialog box appears.
4.
Click [OK].
• It takes about 60 seconds to complete the creation of the NDPS
Printer object.
5.
Double-click the NDPS Printer object that you created.
• The NDPS Printer dialog box appears.
6.
Click [NDPS Remote Printer Management].
177