Set The Energy Save Timers - Oce 31x5e Maintenance Manual

Set the energy save timers

Introduction
You can define the following energy save timers (see 'About the energy save
modes' on page 84):
The low power timer (range 1 to 15 minutes).
■
The sleep mode timer (range 1 to 90 minutes).
■
You can change the default values of the low power timer (15 minutes) and the
sleep mode timer (90 minutes).
If the default values result in problems, due to the usage pattern, you can
request the Océ Service to increase the limits of both timers to a maximum of
240 minutes.
The machine requires 8 seconds to switch back from the low power mode.
The machine requires 8 minutes to switch back from the sleep mode.
Before you begin
Enter the key operator system.
1.
Illustration
[48] Define the energy save timers on the Océ 31x5E
[48] Define the energy save timers on the Océ 31x5E
Defining the low power timer
Activate the 'Machine' section.
1.
Open the 'Basic settings' card.
2.
Press the 'Energy save timers' function key to select 'Low power after' .
3.
Use the left arrow key
second steps.
Define the energy save timers
and right arrow key to increase or decrease in 10
85