Energy Save - Oce cm4010 System Settings Manual

Energy Save

The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce
pollution and conserve natural resources. Touch the [Energy Save] key and configure the settings.
Toner Save in Printer Mode
Toner Save mode can be enabled to reduce toner
consumption when printing. This setting is only effective
for printing that does not use the printer driver. When the
printer driver is used, the printer driver setting takes
precedence.
To enable this setting, select the checkbox
touch the [OK] key.
Print data
This setting may not operate in some applications and
operating systems.
Toner Save in Copy Mode
This setting is used to save toner in copy mode. This
setting functions the same way as toner save in printer
mode.
Auto Power Shut-Off
This setting enables or disables Auto Power Shut-Off. To
disable Auto Power Shut-Off, touch the checkbox so that
a checkmark does not appear
key. Remove the checkmark if you prefer that Auto
Power Shut-Off does not operate.
When the set duration of time elapses after printing
ends, Auto Power Shut-Off activates and causes to
machine to go on standby at a minimal level of power
consumption.
This function reduces your power costs, and at the same
time helps conserve natural resources and reduce
pollution.
If you prefer that auto power shut-off activates as little as
possible, it is recommended that you try lengthening the
time setting after which activation takes place rather than
disabling the function altogether. (The time setting for
activation of Auto Power Shut-Off is selected using the
following "Auto Power Shut-Off
and
Example of
printing in
toner save
mode
and touch the [OK]
Timer" setting.)
Auto Power Shut-Off Timer
The time until Auto Power Shut-Off activates can be set
to any number of minutes from 1 to 240.
Specify the time with the
[OK] key. (To make the number change quickly, keep
your finger on the
Select the time that best suits your workplace needs.
The timer setting will not be effective if Auto Power
Shut-Off is disabled using the
setting.
Preheat Mode Setting
The time until Preheat Mode activates can be set to any
number of minutes from 1 to 240.
Specify the time with the
[OK] key. (To make the number change quickly, keep
your finger on the
Preheat Mode will activate when the duration of time
specified with this setting elapses after printing ends and
no further operations are performed. This function
reduces your power costs, and at the same time helps
conserve natural resources and reduce pollution.
Select the time that best suits your workplace needs.
Preheat mode cannot be disabled.
89
keys and touch the
or key.)
"Auto Power
keys and touch the
or key.)
Shut-Off"