Defining the job charge for 11 x 17" output
Activate the 'Accounting' section.
1.
Open the 'Charges' card.
2.
Press the '11x17 output' function key to select '1' or '2'.
3.
Defining the job charge for a blank page
Activate the 'Accounting' section.
1.
Open the 'Charges' card.
2.
Press the 'Charge blank page' function key to select 'Yes' or 'No' .
3.
Defining the job charge for a scanned page
Activate the 'Accounting' section.
1.
Open the 'Charges' card.
2.
Press the 'Scanned page' function key to select '0', '1' or '2'.
3.
Check
Quit the key operator system.
1.
To check the selection, make a test job.
2.
Check to insure that the job is charged correctly (see 'Print the
accounts-database file' on page 109).
Set the defaults
47