Oce 31x5e Maintenance Manual page 51

Before you begin
Enter the key operator system.
1.
Illustration
[31] Permit the users to access the special feeder
[31] Permit the users to access the special feeder
Preventing access to the special feeder
Activate the 'Machine' section.
1.
Open the 'Basic settings' card.
2.
Press the 'Special feeder' function key to select 'Disabled' .
3.
Permitting the users the access to the special feeder
Activate the 'Machine' section.
1.
Open the 'Basic settings' card.
2.
Press the 'Special feeder' function key to select 'Enabled' .
3.
Check
Exit the key operator system.
1.
To check the selection, start a test job that requires the special feeder.
2.
Set the defaults 51