Oce 31x5e Maintenance Manual page 122

Adding the new staple cartridge
Remove any individual staples that have remained in the staple path and on the
1.
anvil.
Slide a new staple cartridge in the stapler unit until the cartridge clicks into
2.
place.
Closing the stapler unit
Turn over the stapler unit.
1.
Pull the lever of the stapler unit backwards and push down the stapler as far as
2.
it goes.
Release the lever.
Move the latch forwards and tighten the screw.
3.
Closing the covers and doors
Lower the top cover.
1.
Slide the frame to the left until the frame locks in position.
2.
Close the paper-compartment door.
3.
Check
To test the new staple cartridge, manually staple a set until the first staple is
1.
inserted.
122 Océ 31x5E Configuration and Maintenance Manual