Switch The Dac Off Or On - Oce 31x5e Maintenance Manual

Switch the DAC off or on

Introduction
Use the Key Operator System to switch the DAC off. When you stop the DAC,
the machine continues the print process until the current job is completed. The
jobs in the print queue are continued when the DAC is switched on again.
Switch the DAC on with the ON / OFF switch.
You can restart the DAC to solve errors and problems. Use the key operator
system to restart the DAC (see 'Restart the DAC' on page 128).
Attention:
button. You must use the key operator system setting.
You can also use the Océ System configuration to stop the DAC.
Note:
Illustration
[7] Switch the DAC off
[7] Switch the DAC off
Switching the DAC off
Enter the key operator system.
1.
Activate the 'Print settings' section.
2.
Open the 'DAC control' card.
3.
Press the 'DAC' function key to select 'Stop' .
4.
Quit the key operator system.
5.
Switching the DAC on
Press the ON / OFF switch on the DAC.
1.
22 Océ 31x5E Configuration and Maintenance Manual
When restarting the DAC, do not use the ON / OFF or the Reset