Enable the copy control device
Introduction
The copy control device is connected externally to the machine. The system
gives access to external users who are not authorized in the accounts database.
The external user must insert coins or a credit card to gain access to the
machine.
Océ Service must install and configure the Copy control device.
You can enable or disable an installed and configured copy control device.
An enabled copy control device and an access-secured system can be
combined to enable use by internal and external user groups (see 'About the
access-secured system' on page 37).
[20] Entry screen for external users
[20] Entry screen for external users
[21] Entry screen for external and internal users
[21] Entry screen for external and internal users
The following table displays the requirements for the external users when the
copy control device is enabled:
Set the defaults
39