Oce 31x5e Maintenance Manual page 31

Changing the default job settings
Activate the 'Machine' section.
1.
Open the 'Console defaults' card.
2.
Press the 'Use job settings' function key to select 'Current' .
3.
Press the start key
4.
Restoring the default job settings
Activate the 'Machine' section.
1.
Open the 'Console defaults' card.
2.
Press the 'Use job settings' function key to select 'Defined by Océ' .
3.
Press the start key
4.
Check
Exit the key operator system.
1.
Check to insure that the default job settings are set for your needs.
2.
Set the defaults
to confirm.
to confirm.
31