Make A Copy Or Print With The Copy Card - Oce 2090 User Manual

Make a copy or print with the copy card

Introduction
Task for operators
You can use the Océ VarioPrint 2090 in combination with a separate copy
count device. The key operator must enable the copy count device in the Océ
Settings Editor.
You can use the copy count device as a prepaid credit system or a post-paid
debit system. The prepaid system requires copy cards with credit units. The
post-paid system uses an account number.
Prepaid system
The prepaid system uses a copy card that contains credit units. When you make
a print, this print is subtracted from the credit value on your card. When the
card runs out of credit units during a print job or copy job, the system stops
printing and displays a message. You must add credit units or insert a new
card.
Post-paid system
The post-paid system uses an account number that you must enter at the start
of a job.
How to make a copy with the copy card
Insert the copy card into the copy count device.
1
Select a job from the mailbox. You can also create a copy job with the Start key
2
.
Press the Start key
3
If you run out of credit units during a job, the system stops the job and
Note:
asks you to refill the credits on your card or insert a new card.
The accounting function
. The job is sent to the job queue.
49