5061
Multipurpose feeder (MPF) motor removal
See
"MPF drive assembly" on page 7-19
1.
Remove the MPF. See
2.
Remove the MPF autocompensators 1 and 2. See
side restraints removal" on page
3.
Remove the four screws (A) to secure the MPF inner cover.
4.
Disconnect the cable (C), and remove the tape (D) securing the cable in place.
5.
Turn the MPF inner cover over, and remove the four screws (B) securing the motor.
6.
Remove the MPF motor.
4-64
Service Manual
for the part number.
"Multipurpose feeder (MPF) removal" on page
4-62.
4-59.
"Multipurpose feeder (MPF) autocompensator or