Media Type - Kyocera FS-1018MFP Advanced Operation Manual

Media Type

Appendix-10
Preprinted Paper
Preprinted paper should have a bond paper base. The preprinted ink must
be able to withstand the heat of fusing during the printing process, and
must not be affected by silicone oil.
Do not use paper with any kind of surface treatment, such as the type of
paper commonly used for calendars.
Recycled Paper
Select recycled paper that meets the same specifications as the white
bond paper except for whiteness.Refer to Paper Specifications on page 3
of this Appendix.
NOTE:
Before purchasing recycled paper, test a sample on the machine
and check that the printing quality is satisfactory.
The machine is capable of printing under the optimum setting for the type
of media being used. Setting the media type for the paper source by using
COMMAND CENTER will cause the printer to automatically select the
paper source and print in the mode best suited to that type of media.
A different media type setting can be made for each paper source including
the MP tray. Not only can preset media types be selected, but it is also
possible for you to define and select customized media types.Refer to
Custom Paper or Media Type on page 5-40.
Not all media types are available to feed from the paper cassette. Certain
types of paper should be fed using the MP Tray. See the table below: (Yes:
Can be stored; No: Cannot be stored)
Media type
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
MP Tray Paper Cassette
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
ADVANCED OPERATION GUIDE
Specification
Normal 2
Extra heavy
Normal 2
Normal 3
Normal 3
Normal 3
Light
Heavy 1
Heavy 1
Normal 3