Unit Of Measurement - Kyocera FS-1018MFP Advanced Operation Manual

Unit of Measurement

ADVANCED OPERATION GUIDE
Use the following procedure to change the unit of measurement used for
Custom Original Size and Custom Paper Size settings.
1
Press [System Menu / Counter]. The Sys. Menu/Count screen displays.
2
Press or to select Common
Setting and press [Enter].
The Common Setting screen
displays.
3
Press or to select
Measurement and press [Enter].
The Measurement screen
displays.
4
Press or to select Inch or
mm and press [Enter].
A Completed message displays
and the Common Setting screen
returns.
System Settings
Sys. Menu/Count.:
Adjust
Date/Timer Set.
Common Setting
Exit
Common Setting:
One Touch Keys
Toner Setting
Measurement
Exit
Measurement:
* Inch
mm
Cancel
5-5