Resetting The Toner Status - Kyocera FS-1018MFP Advanced Operation Manual

System Settings

Resetting the Toner Status

5-10
To ensure the correct information displays for the Toner Status, the Toner
Gauge must be reset after replacing the Toner Container.
Setting Menu
Toner Gauge Rset
(Toner Gauge Reset)
NOTE:
To ensure the correct Toner Status displays, do not perform this
procedure unless you have replaced the Toner Container.
1
Press [System Menu / Counter]. The Sys. Menu/Count screen displays.
2
Press or to select Common
Setting and press [Enter].
The Common Setting screen
displays.
3
Press or to select Toner
Setting and press [Enter].
The Toner Setting screen
displays.
4 Press or to select Toner
Gauge Rset and press [Enter].
An Are you sure? message
displays.
Description
The toner counter is reset and the amount of
toner remaining will be printed out on the
Status Page as 100 %.
Sys. Menu/Count.:
Adjust
Date/Timer Set.
Common Setting
Common Setting:
Orig./Paper Set.
One Touch Keys
Toner Setting
Toner Setting:
Back
Toner Gauge Rset
ADVANCED OPERATION GUIDE
Exit
Exit
Exit