Accessing Command Center; Supported Systems; Compatible Web Browsers - Kyocera FS-1018MFP Advanced Operation Manual

Using COMMAND CENTER

Accessing COMMAND CENTER

Supported Systems

Compatible Web Browsers

6-2
If the machine is on a TCP/IP network and has a valid IP Address, it may
be managed from any web browser. The browser allows full configuration
of all machine settings. However, unlike AdminManager, the browser
cannot create NetWare print objects. If a browser is used for NetWare
configuration, then NWAdmin must also be used to create the NetWare
print objects.
NOTE:
When accessing COMMAND CENTER home page, ensure the
TCP/IP protocol is installed on the PC you are using and that the IP
Address has been configured for the machine.
The required operating systems (OS) for using COMMAND CENTER are
as follows:
• Microsoft Windows 98SE/ME, Microsoft Windows NT 4.0/2000/XP
• Apple Macintosh OS X 10.x
The embedded web server has been tested with the following web
browsers.
Microsoft Windows
Microsoft Internet Explorer 5.5
and 6.0
Netscape Navigator 6.2 and 7.1
Opera 7
Mozilla 1.5
†
Due to the Macintosh Internet Explorer display problem, some or all of
the elements in the drop-down list may appear in English.
NOTE:
COMMAND CENTER may not display properly depending on the
browser and versions.
Apple Macintosh
Microsoft Internet Explorer 5.2
Netscape Navigator 7.1
Safari 1 (OS X 10.2 and later)
ADVANCED OPERATION GUIDE
†