Sleep Time - Kyocera FS-1018MFP Advanced Operation Manual

Sleep Time

Auto Sleep Mode
ADVANCED OPERATION GUIDE
The Sleep mode automatically puts the machine into a state of sleep if no
operation has been performed on the machine for a pre-set period of time
(between 1 and 240 minutes). The main power indicator alone will light,
and everything else on the operation panel will go out. The factory default
setting is for 30 minutes.
It is possible to engage the Sleep mode manually. Press down on the
Reset/Power key for at least 2 seconds. The Sleep mode will engage
immediately.
1
Press [System Menu / Counter]. The Sys. Menu/Count screen displays.
2
Press or to select Date/
Timer Set and press [Enter].
The Date/Timer Set screen
displays.
3 Press or to select Auto
Sleep and press [Enter].
The Auto Sleep screen displays.
4 Press or to select On or Off
and press [Enter].
A Completed message displays
and the Date/Timer Set screen
returns.
System Settings
Sys. Menu/Count.:
System Setting
Adjust
Date/Timer Set.
Exit
Date/Timer Set.:
Err. Clear Timer
Auto Panel Reset
Auto Sleep
Exit
Auto Sleep:
Off
* On
Cancel
5-29