Kyocera FS-1018MFP Advanced Operation Manual page 167

Advanced > Protocols: IPP
Advanced > Protocols: AppleTalk
ADVANCED OPERATION GUIDE
Item
Bi- Enables (On) or disables (Off) bi-directional printing
directional using the TCP/IP raw port.
Printing If you turn this setting Off, all data received from the
printer will be ignored.
In order to have the data that is received from the
printer returned to the client when printing with
PostScript, PJL and other such commands, it is
necessary to enable bi-directional printing.
Using IPP (Internet Printing Protocol, you can output to the printer over the
Internet or an intranet.
Item
IPP Enables (On) or disable (Off) IPP (Internet Printing
Protocol).
IPP Port Sets the IPP Port Number. Set the default port number
Number to either 80 or 631.
The printing system network component supports Mac OS of various
versions (see Specifications) and is compatible with LaserWriter driver
version 8.x.
Use to set up the Ethernet interface to communicate via AppleTalk,
enabling AppleTalk protocol operation on the printing system.
Item
AppleTalk Enables (On) or disable (Off) AppleTalk protocol.
Printer Specifies the name of the printing system in the
Name AppleTalk network.
Zone Name Specifies the name of the AppleTalk zone (network).
An asterisk (*) means the default zone.
Using COMMAND CENTER
Description
Description
Description
6-19