Kyocera FS-1018MFP Advanced Operation Manual page 168

Using COMMAND CENTER
Advanced > Protocols: NetBEUI
Advanced > Management / E-mail: SMTP
6-20
Peer-to-peer printing is available using NetBEUI protocol. With this
method, the printing system is conveniently located in Windows Network
Neighborhood.
Item
NetBEUI Enables (On) or disables (Off) NetBEUI protocol.
Protocol
Browse With this option set to On, the printing system
Master becomes the browse master and creates a workgroup
in Windows Network Neighborhood. With this option
set to Off, the printing system can only join an existing
workgroup. Note that with Browse Master disabled,
the printing system will only appear on the network if at
least one machine in its workgroup is turned on and
can perform the browse master function.
Printer Printer Name correlates with Host Name in the TCP/IP
Name General tab (Advanced> Protocols: TCP/IP: General).
If you want to change the NetBEUI printer name,
change the TCP/IP Host Name.
Workgroup Workgroup represents the workgroup which will
appear in Entire Network in Windows Network
Neighborhood.
Comment You can enter comments here or leave it blank.
The printing system network component offers an e-mail function. SMTP
(Simple Mail Transfer Protocol) is an embedded protocol to support this
function. To use the e-mail function, the printing system needs connection
to an e-mail server via POP3 protocol.
NOTE:
The following information must be configured to send e-mail.
Item
SMTP Enables (On) or disables (Off) SMTP protocol. For the
Protocol e-mail function to operate, this protocol must be
enabled.
SMTP Port Set the SMTP Port Number or use the SMTP default
Number port 25.
Description
Description
ADVANCED OPERATION GUIDE