Network Settings; Appletalk Setting - Kyocera FS-1018MFP Advanced Operation Manual

Network Settings

AppleTalk Setting

ADVANCED OPERATION GUIDE
Network Settings must be programmed to enable network printing and also
to send e-mail. This section explains the settings required to use the
network functions of the machine.
NOTE:
Contact your Network Administrator to ensure you have the
correct information prior to setting the IP Address.
Always restart the machine after Network Settings have been
programmed, to ensure the settings are registered in the machine. For
information refer to Restarting the Machine on page 5-16.
This setting should be set to On when the machine is connected to an
Apple Macintosh computer.
1 Press [System Menu / Counter]. The System Menu/Count screen
displays.
2
Press or to select System
Setting and press [Enter].
The System Setting screen
displays.
3
Press or to select Network
Setting and press [Enter].
The Network Setting screen
displays.
4
Press or to select AppleTalk
Set and press [Enter].
The AppleTalk Set screen
displays.
Printer Settings
Sys. Menu/Count.:
Report
*
Counter
System Setting
Exit
System Setting:
* Back
Network Setting
Parallel Setting
Exit
Network Setting:
Back
AppleTalk Set.
TCP/IP Setting
Exit
3-5