Optional Settings; Setting Display Contents; Relay Transmission Settings - Konica Minolta bizhub C200 Operation Manual
Network scan/fax/network fax operations
Hide thumbs
Also See for bizhub C200:
- Service manual (863 pages) ,
- User manual (268 pages) ,
- Quick manual (186 pages)
Table of Contents
Advertisement
4
4.3
Optional settings
Depending on the use, additional settings are also available.
Setting display contents
Set the contents to be displayed when the [Fax/Scan] key or the [Reset] key is pressed on the control panel.
Note
For details, refer to "Display Settings - Default Screen" on page 9-6 or "Display Settings - Default Fax
Screen" on page 9-7.
Relay transmission settings
With IP relay transmissions, this machine can be used as an originating station and as a relay station.
-
To use this machine as a relay station, "Gateway TX" must first be set to "Allow".
-
To use this machine as an originating station, a routing destination must first be registered with
"Network Settings".
!
Detail
For details on specifying the network settings for IP relay transmissions, refer to the User manual –
Network Administrator.
4-6
Registration of basic information
bizhub C200
Hide quick links:
Advertisement
Table of Contents
