10
3
Check the forwarding destination, and then touch [OK] to apply the specified settings.
10.5.2
About Document Management
Settings can be specified for the operation (print, forward or receive in memory) that is performed when a fax
is received.
-
As a factory default, the "Print" setting was selected.
-
If a remote copy operation is received, it is printed, regardless of the setting.
-
The Document Management settings are prioritized in the following order: "F-Code", "reception port"
and "All Other Docs.".
Document type
Documents are divided into the following three categories.
-
All Other Docs.: Specify the reception method for documents that were received normally.
-
Network/G3-1/G3-2: A different reception method can be specified for each line.
-
RX Doc.: A reception user box specifically for documents containing special information, such as F-
codes, can be created, and the reception method can be specified.
Note
With software switch settings, sender information can be added when received documents are
forwarded. For details, refer to the User manual – Network Administrator.
[G3-1] and [G3-2] appear only if the optional fax kit has been installed.
10-12
Administrator Management settings
bizhub C200