9
9.4.5
Specifying fax settings
The procedure for specifying G3 fax settings is described below.
Fax number
Type in the fax number (up to 64 digits) for the recipient. Use the keypad to enter the number.
-
Tone: If pulse dialing is being used, touch this button to send a push-button tone. This is used when a
fax information service is being used. "T" appears in the screen.
-
Pause: Touch this button to insert a pause when dialing. Touch the button once to insert a 1-second
pause. "P" appears in the screen.
-
S: Touch this button to perform a checked receiver transmission. "S" appears in the screen.
Speed
Select the transmission speed. Specify a setting between 2.4 and 33.6.
Overseas
When faxing to a location where transmission conditions are poor, specify a slower transmission speed to
ensure that the fax can be sent.
9-18
User Settings / User Management / One-Touch/Box Reg.
bizhub C200