Displaying An Error Message; G3 Fax - Konica Minolta bizhub C200 Operation Manual

11
11.3

Displaying an error message

When any trouble occurs, this machine displays an error screen with one of error messages shown in the
following table. Refer to the following table for corrective action.
If the action also fails to enable successful communication, contact your service representative.
11.3.1

G3 Fax

Error message
The original size cannot be detect-
ed.
Cannot be set with XXXX.
The job has been deleted due to in-
sufficient memory.
Malfunction detected. Inform the
service representative of the error
code.
11-6
Action
The original size could not be detected. Select the original size.
Settings or functions that cannot be specified at the same time have been
specified. Select only one of the settings or functions.
The memory if full. If documents stored in the memory are waiting to be print-
ed, print them.
Some malfunction occurred in the machine. Inform your service representative
of the code displayed in the screen.
Fax/Scan function troubleshooting
bizhub C200