F-Code; Dial - Internet Fax - Konica Minolta bizhub C200 Operation Manual

Transmitting data

F-Code

By entering, for example, a SUB address, the original can be sent to a specific user box on the recipient's
machine. Transmissions sent with F-codes are called "user box transmissions".
- F-Code (SUB): Type in the SUB address. This is where the number of the user box used with the user
box transmission is entered.
- F-Code P/W (SID/PWD): If a password is specified with the user box transmission, type in the
password. For confirmation, type in the password twice.
!
Detail
An F-code transmission can be used only if the recipient's fax machine supports F-code functions.
If an F-code is specified by directly typing it in, only one transmission with the specified F-code can be
completed per call.
5.3.6

Dial - Internet Fax

From the control panel, type in the e-mail address.
- Domain: If frequently entered domain names have been registered, the e-mail address can easily be
entered.
- Scanning Mode: Select the image transmission size and the coding method. For details, refer to
"Scanning Mode" on page 5-22.
- Add: Touch this button to specify an additional destination.
Note
For details on registering domain names, refer to "One-Touch/Box Reg. - Domain Name" on page 9-25.
If the optional fax kit has not been installed, [Address] appears instead of [Dial].
bizhub C200
5
5-21