Types Of Reports/Lists - Konica Minolta bizhub C200 Operation Manual

Explanation of reports/lists
8 Explanation of reports/lists
8.1

Types of reports/lists

The following types of reports and lists can be printed on this machine.
Reports that are printed automatically, printed by a specified printing method, and that are printed when
ordered as needed. In addition, the lists that can be printed are described below.
Report Name
Activity Report
TX Report
RX Report
Interim Report
Memory Clear Report
Broadcast Report
TX Report
One-Touch List
Program List
Bulletin List
Setting List
!
Detail
With software switch settings, the machine can be set so that lists can be printed only by the
administrator and so that registered destinations are not displayed in the reports. For details, refer to
the User manual – Network Administrator.
bizhub C200
Description
This report provides a record of transmission and reception jobs. The report is print-
ed after every 50 transmission/reception jobs. Settings for specifying when the activ-
ity report is printed can be specified with "Activity Report" in the Report Settings
screen of Administrator mode.
This report provides a record of transmission jobs, including the document number,
starting date and time of the transmission, required time, recipient's name, mode,
number of sent pages and transmission volume. The machine is set to print this re-
port after every 50 transmission jobs. This report can be printed manually by touching
[Print Lists].
This report provides a record of reception jobs, including the document number,
starting date and time of the reception, required time, sender's name, mode, number
of sent pages and transmission result. The machine is set to print this report after
every 50 reception jobs. This report can be printed manually by touching [Print Lists].
A report of the transmission status when a fax is being sent to multiple recipients,
such as with broadcast transmissions, can be printed. This report can be printed if
[Interim Rep.] appears when checking a job on the Send tab of the Job List screen.
This list is automatically printed if transmission/reception information is erased due
to a power outage and the machine is turned on again.
When a broadcast transmission is performed, whether the fax was sent to all recipi-
ents can be checked with this report.
A report of the transmission results can be printed. The timing for printing this report
can be set to one of the following: "ON", "If TX Fails" and "OFF".
A list of destinations registered as one-touch dial buttons can be printed.
A list of the details of the registered programs can be printed.
A list of the names of documents registered on bulletin boards can be printed.
A list of the machine settings can be printed.
8
8-3