Default Scan/Fax Settings - Konica Minolta bizhub C451 Network Scanner Operations

4

Default Scan/Fax settings

Specify the default settings (settings selected when the [Reset] key is pressed) for the Fax/Scan mode screen.
1
Touch [4 Scan/Fax Settings].
– For details on displaying the User Settings screen, refer to "Displaying the user settings screen" on
page 4-5.
2
Press the [Default Scan/Fax Settings] key.
3
Select the default settings.
4
Touch [OK].
Note
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
If Konica Minolta TWAIN is being used, it is automatically unlocked at the specified time, even if it was
locked from the computer.
4-38
Specifying utility mode parameters
bizhub C451/C550/C650