Setting Initial Setting Value Of Fax Function (Default Scan/Fax Settings); Default Scan/Fax Settings - Konica Minolta bizhub C650 User Manual

Utility mode
9.6

Setting initial setting value of fax function (Default Scan/Fax Settings)

Initial setting value of Fax/Scan function can be set.
Fax/Scan functions selected when main power supply is turned on or when [Reset] key is pressed, can be set.
Default Scan/Fax Settings: Current Setting/ Factory Default*
- [Current Setting]
Each item set on the touch panel before entering the Utility mode is registered as initial setting of
Fax/Scan function.
- [Factory Default]
The factory default is registered as initial settings of Fax/Scan function.
* is a default value at the time of purchase.
!
Detail
For this setting, display the Fax/Scan screen and then press the [Utility/Counter].

Default Scan/Fax Settings

1
Refer to "Displaying User Settings screen" on page 9-2 to display User Settings screen.
2
Touch [Scan/Fax Settings].
– Some items may not be displayed according to setting options.
– In the Utility mode, numbers displayed on buttons can be entered and selected with the keypad. In
case of [Scan/Fax settings], enter [4] with the keypad.
3
Touch [Default Scan/Fax Settings].
C650
9
9-19