TP-Link TL-SG3424 User Manual page 92

dhcp-boot
set dhcp-boot
Syntax:
set dhcp-boot <sec>
Description:
To set up the delay time for DHCP Boot.
Argument:
<sec>:range syntax: 0, 1-30. The value "0" is to disable dhcp-boot delay
Possible value:
<sec>:0-30
Example:
GEL2-SW24(dhcp-boot)# set dhcp-boot 30
show
Syntax:
show
Description:
To display the status of DHCP Boot.
Argument:
None
Possible value:
None
Example:
GEL2-SW24(dhcp-boot)#show
dhcp boot : Enable
Second : 10
175
User Manual
Publication date: January, 2006
Revision A2
User Manual
diag
diag
Syntax:
diag
Description:
Diag is used to test whether UART, DRAM, Flash and EEPROM is normal or not.
Argument:
None.
Possible value:
None.
Example:
* ( / 6 : G L D J G L D J
( ( 3 5 2 0 7 H V W 2 .
8 $ 5 7 7 H V W 2 .
' 5 $ 0 7 H V W 2 .
) O D V K 7 H V W 2 .
loopback
Syntax:
Loopback
Description:
For Internal/External Loopback Test.
Argument:
None.
Possible value:
None.
Example:
* ( / 6 : G L D J O R R S E D F N
, Q W H U Q D O / R R S E D F N 7 H V W
( [ W H U Q D O / R R S E D F N 7 H V W
) D L O
ping
Syntax:
ping <ip>
Description:
To confirm that whether the remote end-station or switch itself is alive or not.
Argument:
<ip> : ip address or domain name
Possible value:
IP address, e.g. 192.168.2.65 or domain name, e.g. tw.yahoo.com
Example:
* ( / 6 : G L D J S L Q J
* D W H Z D \
L V D O L Y H
Publication date: January, 2006
Revision A2
176
2 .
3 R U W