TP-Link TL-SG3424 User Manual page 81

set port-control
Syntax:
set port-control <port-range> <authorized>
Description:
To set up 802.1X status of each port.
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<authorized> : Set up the status of each port
0:ForceUnauthorized
1:ForceAuthorized
2:Auto
Possible value:
<port range> : 1 to 24
<authorized> : 0, 1 or 2
Example:
GEL2-SW24(802.1X)# set port-control 2 2
set quiet-period
Syntax:
set quiet-period <port-range> <sec>
Description:
A timer used by the Authenticator state machine to define periods of time during
when it will not attempt to acquire a Supplicant.
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<sec> : timer , range 0-65535
Possible value:
<port range> : 1 to 24
<sec> : 0-65535, default is 60
Example:
GEL2-SW24(802.1X)# set quiet-period 2 30
set reAuthEnabled
Syntax:
set reAuthEnabled <port-range> <ebl>
Description:
A constant that define whether regular reauthentication will take place on this port.
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<ebl> :
0:OFF Disable reauthentication
1:ON Enable reauthentication
Possible value:
<port range> : 1 to 24
<ebl> : 0 or 1, default is 1
Example:
GEL2-SW24(802.1X)# set reAuthEnabled 2 1
153
User Manual
Publication date: January, 2006
Revision A2
User Manual
set reAuthMax
Syntax:
set reAuthMax <port-range> <max>
Description:
The number of reauthentication attempts that are permitted before the port
becomes Unauthorized.
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<max> : max. value , range 1-10
Possible value:
<port range> : 1 to 24
<max> : 1-10, default is 2
Example:
GEL2-SW24(802.1X)# set reAuthMax 2 2
set reAuthPeriod
Syntax:
set reAuthPeriod <port-range> <sec>
Description:
A constant that defines a nonzero number of seconds between periodic
reauthentication of the supplicant.
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<sec> : timer , range 1-65535
Possible value:
<port range> : 1 to 24
<sec> : 1-65535, default is 3600
Example:
GEL2-SW24(802.1X)# set reAuthPeriod 2 3600
set serverTimeout
Syntax:
set serverTimeout <port-range> <sec>
Description:
A timer used by the Backend Authentication state machine in order to determine
timeout conditions in the exchanges between the Authenticator and the Supplicant
or Authentication Server. The initial value of this timer is either suppTimeout or
serverTimeout, as determined by the operation of the Backend Authentication state
machine.
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<sec> : timer , range 1-65535
Possible value:
<port range> : 1 to 24
<sec> : 1-65535, default is 30
Example:
GEL2-SW24(802.1X)# set serverTimeout 2 30
Publication date: January, 2006
Revision A2
154