TP-Link TL-SG3424 User Manual page 26

Function name:
Management Security Configuration
Function description:
The switch offers Management Security Configuration function. With this
function, the manager can easily control the mode that the user connects to
the switch. According to the mode, users can be classified into two types:
Those who are able to connect to the switch (Accept) and those who are
unable to connect to the switch (Deny). Some restrictions also can be placed
on the mode that the user connect to the switch, for example, we can decide
that which VLAN VID is able to be accepted or denied by the switch, the IP
range of the user could be accepted or denied by the switch, the port that the
user is allowed or not allowed to connect with the switch, or the way of
controlling and connecting to the switch via Http, Telnet or SNMP.
Fig. 3-7
Parameter description:
Name:
A name is composed of any letter (A-Z, a-z) and digit (0-9) with maximal
8 characters.
VID:
The switch supports two kinds of options for managed valid VLAN VID,
including "Any" and "Custom". Default is "Any". When you choose
"Custom", you can fill in VID number. The valid VID range is 1~4094.
43
User Manual
Publication date: January, 2006
Revision A2
User Manual
IP Range:
The switch supports two kinds of options for managed valid IP Range,
including "Any" and "Custom". Default is "Any". In case that" Custom"
had been chosen, you can assigned effective IP range. The valid range
is 0.0.0.0~255.255.255.255.
Incoming Port:
The switch supports two kinds of options for managed valid Port Range,
including "Any" and "Custom". Default is "Any". You can select the ports
that you would like them to be worked and restricted in the management
security configuration if "Custom" had been chosen.
Access Type:
The switch supports two kinds of options
including "Any" and "Custom". Default is "Any". "Http", "Telnet" and
"SNMP" are three ways for the access and managing the switch in case
that" Custom" had been chosen.
Action:
The switch supports two kinds of options
including "Deny" and "Accept". Default is "Deny". When you choose
"Deny" action, you will be restricted and refused to manage the switch
due to the "Access Type" you choose. However, while you select
"Accept" action, you will have the authority to manage the switch.
Edit/Create:
A new entry of Management Security Configuration can be created after
the parameters as mentioned above had been setup and then press
<Edit/Create> button. Of course, the existed entry also can be modified
by pressing this button.
Delete:
Remove the existed entry of Management Security Configuration from
the management security table.
Publication date: January, 2006
Revision A2
44
,
for managed valid Access Type
,
for managed valid Action Type