TP-Link TL-SG3424 User Manual page 65

Function name:
802.1X State Setting
Function description:
This function is used to configure the global parameters for RADIUS
authentication in 802.1X port security application.
Parameter description:
Radius Server:
RADIUS server IP address for authentication.
Default: 192.168.223.100
Port Number:
The port number to communicate with RADIUS server for the
authentication service. The valid value ranges 1-65535.
Default port number is 1812.
Secret Key:
The secret key between authentication server and authenticator. It is a
string with the length 1 – 31 characters. The character string may contain
upper case, lower case and 0-9. It is character sense. It is not allowed for
putting a blank between any two characters.
Default: Radius
Fig. 3-56
121
User Manual
Publication date: January, 2006
Revision A2
User Manual
Function name:
802.1X Mode Setting
Function description:
Set the operation mode of 802.1X for each port. In this device, it supports only
Multi-host operation mode.
Parameter description:
Port Number:
Indicate which port is selected to configure the 802.1X operation mode.
802.1X Mode:
802.1X operation mode. There are two options, including Disable and
Multi-host mode. Default is Disable.
Disable
It will have the chosen port acting as a plain port, that is no 802.1X
port access control works on the port.
802.1X with Multi-host
In Multi-host mode, for the devices connected to this port, once a
supplicant is authorized, the devices connected to this port can access
the network resource through this port.
Fig. 3-57
Publication date: January, 2006
Revision A2
122