TP-Link TL-SG3424 User Manual page 89

bandwidth
disable egress-rate
Syntax:
disable egress-rate <range>
Description:
To cancel the egress-rate of the port.
Argument:
<range>:syntax 1,5-7, available from 1 to 24
Possible value:
<range>: 1 to 24
Example:
GEL2-SW24(bandwidth)# disable egress-rate 1-8
disable ingress-rate
Syntax:
disable ingress-rate <range>
Description:
To cancel the Ingress-rate of the port.
Argument:
<range>:syntax 1,5-7, available from 1 to 24
Possible value:
<range>: 1 to 24
Example:
GEL2-SW24(bandwidth)# disable ingress-rate 1-8
disable storm-rate
Syntax:
disable storm-rate <range>
Description:
To cancel the storm-rate of the port.
Argument:
<range>:syntax 1,5-7, available from 1 to 24
Possible value:
<range>: 1 to 24
Example:
GEL2-SW24(bandwidth)# disable storm-rate 1-8
169
User Manual
Publication date: January, 2006
Revision A2
User Manual
enable egress-rate
Syntax:
enable egress-rate <range> <data_rate>
Description:
To set up the egress-rate of the port.
Argument:
<range>:syntax 1,5-7, available from 1 to 24
<data_rate>: 0-1000
Possible value:
<range>: 1 to 24
<data_rate>: 0-1000
Example:
GEL2-SW24(bandwidth)# enable egress-rate 1-16 200
enable ingress-rate
Syntax:
enable ingress-rate <range> <data_rate>
Description:
To set up the Ingress-rate of the ports.
Argument:
<range>:syntax 1,5-7, available from 1 to 24
<data_rate>: 0-1000
Possible value:
<range>: 1 to 24
<data_rate>: 0-1000
Example:
GEL2-SW24(bandwidth)# enable ingress-rate 1-16 100
enable storm-rate
Syntax:
enable storm-rate <range> <data_rate>
Description:
To set up the storm-rate of the ports.
Argument:
<range>:syntax 1,5-7, available from 1 to 24
<data_rate>: 0-1000
Possible value:
<range>: 1 to 24
<data_rate>: 0-1000
Example:
GEL2-SW24(bandwidth)# enable strom-rate 1-16 150
Publication date: January, 2006
Revision A2
170