TP-Link TL-SG3424 User Manual page 68

Fig. 3-60
Function name:
Email/SMS Configuration
Function description:
Alarm configuration is used to configure the persons who should receive the
alarm message via either email or SMS, or both. It depends on your settings.
An email address or a mobile phone number has to be set in the web page of
alarm configuration (See Fig. 3-61). Then, user can read the trap information
from the email or the mobile phone. This function provides 6 email addresses
and 6 mobile phone numbers at most. The 24 different trap events will be sent
out to SNMP Manager when trap event occurs. After ticking trap events, you
can fill in your desired email addresses and mobile phone numbers. Then,
please click <Apply> button to complete the alarm configuration. It will take
effect in a few seconds.
Note: SMS may not work in your mobile phone system. It is customized for different
systems.
127
User Manual
Publication date: January, 2006
Revision A2
User Manual
Parameter description:
Email:
Mail Server: the IP address of the server transferring your email.
Username: your username on the mail server.
Password: your password on the mail server.
Email Address 1 – 6: email address that would like to receive the
alarm message.
SMS:
SMS Server: the IP address of the server transferring your SMS.
Username: your username in ISP.
Password: your username in ISP.
Mobile Phone 1-6: the mobile phone number that would like to
receive the alarm message.
Publication date: January, 2006
Revision A2
128
Fig. 3-61