Local Commands Of Cli - TP-Link TL-SG3424 User Manual

save user
Syntax:
save user
Description:
To save the current configuration as the user-defined configuration. When you enter
this command, the CLI would save your current configuration into the non-volatile
FLASH as user-defined configuration.
Argument:
None.
Possible value:
None.
Example:
GEL2-SW24# save user
Saving user...
Save Successfully
GEL2-SW24#
151
User Manual
Publication date: January, 2006
Revision A2
User Manual

4-2-2. Local Commands of CLI

802.1X
set max-request
Syntax:
set max-request <port-range> <times>
Description:
The maximum number of times that the state machine will retransmit an EAP
Request packet to the Supplicant before it times out the authentication session.
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<times>: max-times , range 1-10
Possible value:
<port range> : 1 to 24
<times>: 1-10, default is 2
Example:
GEL2-SW24(802.1X)# set max-request 2 2
set mode
Syntax:
set mode <port-range> <mode>
Description:
To set up the 802.1X mode of each port.
authentication
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<mode>: set up 802.1X mode
0:disable the 802.1X function
1:set 802.1X to Multi-host mode
Possible value:
<port range> : 1 to 24
<mode>: 0 or 1
Example:
GEL2-SW24(802.1X)# set mode 2 1
GEL2-SW24(802.1X)#
Publication date: January, 2006
Revision A2
152