TP-Link TL-SG3424 User Manual page 61

Function name:
Aggregator View
Function description:
To display the current port trunking information from the aggregator point of
view.
Parameter description:
Aggregator:
It shows the aggregator ID (from 1 to 24) of every port. In fact, every port
is also an aggregator, and its own aggregator ID is the same as its own
Port No..
Method:
Show the method a port uses to aggregate with other ports.
Member Ports:
Show all member ports of an aggregator (port).
Ready Ports:
Show only the ready member ports within an aggregator (port).
Fig.3-50
113
User Manual
Publication date: January, 2006
Revision A2
User Manual
Function name:
LACP Detail (LACP Aggregator Detailed Information)
Function description:
Show the detailed information of the LACP trunking group.
Parameter description:
Actor:
The switch you are watching on.
Partner:
The peer system from this aggregator's view.
System Priority:
Show the System Priority part of a system ID.
MAC Address:
Show the MAC Address part of a system ID.
Port:
Show the port number part of an LACP port ID.
Key:
Show the key value of the aggregator. The key value is determined by
the LACP protocol entity and can't be set through management.
Trunk Status:
Show the trunk status of a single member port."---" means "not ready"
Fig. 4-51
Publication date: January, 2006
Revision A2
114