TP-Link TL-SG3424 User Manual page 104

max-pkt-len
set len
Syntax:
set len <range> <length>
Description:
To set up the maximum length of the packet that each port of the switch can accept.
Argument:
<range>: port range, syntax 1,5-7, available from 1 to 24
<length (bytes)>: maximum packet length
Possible value:
<range> : 1 to 24
<length (bytes)>: 1518/1532/9216
Example:
GEL2-SW24(max-pkt-len)# set len 1-8 9216
show
Syntax:
show
Description:
To show current setting of maximum packet length setting.
Argument:
None
Possible value:
None
Example:
GEL2-SW24(max-pkt-len)# show
PORT Max Packet Length
------ -------------------
1 1532
2 1532
3 1532
4 1532
5 1532
6 1532
7 1532
8 1532
9 1532
10 1532
11 1532
12 1532
13 1532
14 1532
15 1532
16 1532
17 1532
18 1532
19 1532
20 1532
21 1532
22 1532
23 1532
24 1532
199
User Manual
Publication date: January, 2006
Revision A2
User Manual
mirror
set mirror-mode
Syntax:
set mirror-mode <rx|disable>
Description:
To set up the mode of mirror (rx mode or disable).
Argument:
<rx | disable>:
rx : enable the mode of mirror(Only mirror the packets that is received)
disable: end the function of mirror
Possible value:
<rx | disable>: rx or disable
Example:
GEL2-SW24(mirror)# set mirror-mode rx
set monitored-port
Syntax:
set monitored-port <range>
Description:
To set up the port that will be monitored. The packets received by this port will be
copied to the monitoring port.
Argument:
<range>: the port that is chosen for monitored port of the mirror function,
syntax 1,5-7, available from 1 to 24
Possible value:
<range>: 1 to 24
Example:
GEL2-SW24(mirror)# set monitored-port 3-5,8,10
set monitoring-port
Syntax:
set monitoring-port <#>
Description:
To set up the monitoring port of the mirror function. User can observe the packets
that the monitored port received via this port.
Argument:
<#>: the monitoring port that is chosen for the mirror function. Only one port is
allowed to configure, available from 1 to 24
Possible value:
<#>:1 to 24
Example:
GEL2-SW24(mirror)# set monitoring-port 2
Publication date: January, 2006
Revision A2
200