TP-Link TL-SG3424 User Manual page 34

3-3. Mirror
Function name:
Mirror Configuration
Function description:
Mirror Configuration is to monitor the traffic of the network. For example, we
assume that Port A and Port B are Monitoring Port and Monitored Port
respectively, thus, the traffic received by Port B will be copied to Port A for
monitoring.
Note:
When configuring the mirror function,
sniffer port and aggregated port at the same time. It will cause something
wrong.
Parameter description:
Mode:
Used for the activation or de-activation of Port Mirror function. Default is
disable.
Monitoring Port:
Set up the port for monitoring. Valid port is Port 1~24 and default is
Port 1.
Monitored Port:
Set up the port for being monitored. Just tick the check box (
the port x and valid port is Port 1~24.
59
User Manual
you should avoid setting a port to be a
)
beside
Fig. 3-15
Publication date: January, 2006
Revision A2
User Manual
3-4. Bandwidth Management
Function name:
Bandwidth Management
Function description:
Bandwidth Management function is used to set up the limit of Ingress and
Egress bandwidth for each port.
Note:
Each port of the switch owns 16KB packet buffer. The packet buffer size will
be reduced when the bandwidth rate limitation
that jumbo frame cannot be forwarded.
Please avoid enabling jumbo frame and bandwidth rating
same time.
Fig. 3-16
Parameter description:
Port Number:
Choose the port that you would like this function to work on it. Valid
range of the port is 1~24.
All Traffic for Ingress Rate Limiting(Policing):
Set up the limit of Ingress bandwidth for the port you choose. Incoming
traffic will be discarded if the rate exceeds the value you set up in Data
Rate field. Pause frames are also generated if flow control is enabled.
The format of the packet limits to unicast, broadcast and multicast. Valid
range is 0~1000.
Publication date: January, 2006
Revision A2
60
is enabled, which may cause
functions at the